Mechanical values and environment | |
---|---|
Housing material | PA6-GF30 gray |
Ambient temperature | -20 ... 70 °C |
Degree of protection | IP67 in installed state (only access side) |
Mounting method | On the front |
Mounting cut-out according to DIN 43700 | 33 x 68 mm |
Electrical connection ratings | |
LED indicator | |
Green | Operational |
Yellow | Key in operating distance |
Red | Fault |
Connection cross-section | 0,14 ... 1,5 mm? |
Parameters for floating semiconductor switching contact LA | |
Switching voltage | 0 ... 24 ... 30 V |
Switching current | 1 ... 10 ... 50 mA Function description of the overload protection in the Electronic-Key adapter manual, order No. 110845 |
Utilization category according to EN 60947-5-1 | |
AC-15 | 24V 50mA |
AC-12 | 24V 50mA |
DC-12 | 24V 50mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 50mA |
Interface and signaling | |
Switching voltage | UB-2 ... UB V |
Switching current | 1 ... 10 ... 50 mA |
Power supply | |
Operating voltage DC | 9 ... 24 ... 28 V DC For use and operation as per the UL requirements, a power supply with the feature "for use in class 2 circuits" must be used. |
Current consumption | max.70 mA |
Interface, bus | |
Interface and signaling | |
Data interface | 4-bit parallel plus strobe, binary coded via High/Low level |
Miscellaneous | |
Parameters for floating semiconductor switching contact LA | |
Additional feature | |
Resistance in switched-on state in Ohm 35 | |
Capacitive load on output in µFmax.1 |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |